DJI Phantom 4 (PRO/ADV) Survey 3/2/1
Dual Camera Mount


 

NO CAMERA CLIPS INCLUDED: PLEASE ADD ABOVE

 

This mount allows you to easily attach up to two Survey3Survey2, Survey1 or GoPro Hero 4/3+/3 cameras to the Phantom 4 (PRO/ADV), Phantom 4 drones while still keeping the original drone camera installed. See this mount to carry only a single camera.

Included:

(1) Durable & lightweight plastic mounting plate

(4) M2 Screws (replace existing DJI screws)

(4) Dampening balls

(1) Dual Survey camera mounting plate

Dual Camera Mount Weight (not including camera clips and cameras): 40.15g

Peau Productions (MAPIR) is in no way liable for any damage caused to or by your drone. We have thoroughly tested this mount and when installed properly will not interfere with the normal operation of the drone.

 

Install Instructions:

Step 1: The mount will already come assembled. Simply unscrew the original DJI screws in the 4 locations marked below with a (not included) 1.5mm hex tool:

Step 2: Place the mount as shown and tighten the 4 screws included with the mount:

Step 3: If using the Survey3 cameras, feed the GPS receiver cable through a hole in the mount, peel off the adhesive backing on the bottom of the GPS receiver, and press it such that the GPS receiver adheres to the center of the mount. Try not to have the adhesive touch the dampening balls for the best adhesion.

 

Step 4: Happy flying!