Label | Name | Description |
A | GNSS (GPS) Receiver | Advanced V2 GNSS (uBlox MAX-M10S) |
B | Lens Cover | Hydrophobic glass lens protector. Twist to unlock. |
C |
Rear Door Latches
|
Holds silicone door gasket sealed during water immersion. |
D | Lens Focus Wheel | When the Lens Cover is removed you can easily turn the lens wheel to adjust the focus distance. [Optional Accessory] |
E | Tripod Screw Threads | 1/4-20 mounting threads |
F | Tripod Screw Threads | 1/4-20 mounting threads |
G | 6 pin m12 (Male) Power + Data Port | PWR, GND, GNSS, TRIG, EXP, GND |
H | Tripod Screw Threads | 1/4-20 mounting threads |
J | Memory Card Port | Micro SD memory card (up to 512GB) |
K | Survey3 Camera | Supports all 12 Survey3W and Survey3N models |
L | Status LED | Conveniently check camera status |
M | Power Switch | X = OFF, O = ON |
N | GNSS Source Switch | Down = External GNSS, Up = Internal GNSS |
O | Rear Door | Hinged 180 degree rear door is easily removed |
P | Rear Gasket | Thick silicone sealing gasket |
Label | Name | Description |
A | Power Switch Off (X) | Disconnects external power connection |
B | Power Switch On (O) | Connects external power connection |
C | Status LED | Conveniently check camera status |
D | Capture Mode | Photo, Video, Media Review |
E | Shutter Speed | Camera exposure duration |
F | Photo Count | Number of images available to capture |
G | Battery Charge | Battery meter, 4 levels: 25%, 50%, 75%, 100% |
H | Capture Button | Click to capture an image |
J | GNSS Source Switch | Down = External GNSS |
K | GNSS Source Switch | Up = Internal GNSS |
L | GNSS Status | GNSS Status |
M | Switch Door Tab | Pull tab up and out to open door |
N | Camera Pull Tab | Pull tab to carefully remove camera from housing, unplugging cables as needed. Door must be removed first. |
O | Camera Settings | Adjust main camera settings |
P | Media Information | Shows media resolution, ratio, framerate, etc |
Q | Mode Settings | Adjust mode (photo) settings |