This discounted bundle has everything you'll need to use the Survey3 cameras with all DJI Phantom 4 model vehicles. Our new tilting Phantom 4 mount allows you to lock the cameras in a tilted location such that during forward flight the cameras are parallel with the ground (nadir). Simply choose the number of cameras you want, the models of the cameras, and the micro SD memory capacity to complete your package.

Supported Models: Phantom 4 Pro V2.0, Phantom 4 Pro, Phantom 4 Pro Obsidian, Phantom 4 RTK, Phantom 4 Multispectral, Phantom 4 Advanced, Phantom 4.

Included in this bundle:

• Survey3 Camera(s)
• Survey3 Glass Lens Protector(s)
• DJI Phantom 4 MAPIR Survey 3/2/1 Tilting Mount
• Survey3 Camera Clip(s)
• MicroSD card(s)
• Advanced V2 GPS
• Labor: Modify Survey3 GPS Cables (Dual Mount Only)

For the single mount you will receive 1 Advanced V2 GPS and a single Advanced V2 GPS cable. For the dual mount you will receive 1 Advanced V2 GPS, 1 dual (2) Advanced V2 GPS cable and a Standard GPS (not used, extra).

Install Instructions:

Step 1: The mount will already come assembled. Simply unscrew the original DJI screws in the 4 locations marked below with a (not included) 1.5mm hex tool:

Step 2: Place the mount as shown and tighten the 4 screws included with the mount:

Step 3: If using the Survey3 cameras peel off the adhesive backing on the bottom of the GPS receiver, and press it such that the GPS receiver adheres to the center of the mount. 

Step 4: Happy flying!