7592 Metropolitan Drive
Suite 401
San Diego, CA USA
(877) 949 - 1684

Kernel Plugs Breakout Board (Kernel 40pin Port)

Use this "plugs breakout board" to connect to your Kernel camera or Kernel array. It provides the following communications:

  • USB (including boot mode, useful to load different firmware onto the camera)
  • HDMI Video
  • SD Video (DAC)
  • PWM_IN / PWM_OUT
  • UAVCAN HIGH / LOW
  • UART RX / TX
  • POWER/GROUND

No cables are included with this item and must be purchased separately.

This board allows you to connect the power and USB to a computer and update the firmware of the camera. See the following details (and last item picture above) to set the board into each mode:

Normal Mode: move both white switches to numbered 1/2 position

Boot/Programming Mode: move both white switches to ON position