Survey3 Firmware

Instructions for Updating Survey3 Camera Firmware:

  1. Download the firmware file by clicking a link below and copying the .bin file onto an empty SD card.
  2. Make sure the camera's battery is charged a minimum 50% and the camera is powered off. Do not rely on USB power during firmware updates. 
  3. Insert the card into the camera and press either the front or top button to begin the update. The camera's LEDs will flash and the beep will sound during the update.
  4. Once the camera fully boots up the new firmware will be installed. You can confirm by checking the firmware version in the camera settings, using the rear LCD navigation.

*If camera is not detecting firmware file, format the card from the settings option on the camera.

 

NEWEST FIRMWARE VERSIONS

Firmware Version Camera Model (DOWNLOAD LINK) Default Capture Mode PWM 2000us Mode
1.13 Survey3W RGB Photo Photo
1.13 Survey3W OCN Photo Photo
1.13 Survey3W RGN Photo Photo
1.13 Survey3W NGB Photo Photo
1.13 Survey3W RE Photo Photo
1.13 Survey3W NIR Photo Photo
1.13 Survey3N RGB Photo Photo
1.13 Survey3N OCN Photo Photo
1.13 Survey3N RGN Photo Photo
1.13 Survey3N NGB Photo Photo
1.13 Survey3N RE Photo Photo
1.13 Survey3N NIR Photo Photo
 
1.12 Survey3W RGB Video Video
1.12 Survey3W OCN Video Video
1.12 Survey3W RGN Video Video
1.12 Survey3W NGB Video Video
1.12 Survey3W RE Video Video
1.12 Survey3W NIR Video Video
1.12 Survey3N RGB Video Video
1.12 Survey3N OCN Video Video
1.12 Survey3N RGN Video Video
1.12 Survey3N NGB Video Video
1.12 Survey3N RE Video Video
1.12 Survey3N NIR Video Video

VERSION HISTORY

Version 1.13 - October 8, 2023

  • Support for up to 512GB memory cards (must format to FAT32, recommended formatting program HERE)
  • Rear LCD can be turned back on after lock (default 1 min lock) with a single touch to the black screen, no physical button press required.
  • Time Zone is now set by default to GMT-0, which is GNSS time.
  • RAW mode is now enabled by default. We do not recommend using JPG mode if performing reflectance calibration.
  • Interval Mode is now default to OFF.
  • Shutter speeds updated for all models to reflect default RAW mode being enabled.

Survey3W_RGB

Survey3W_OCN

Survey3W_RGN

Survey3W_NGB

Survey3W_RE

Survey3W_NIR



Survey3N_RGB

Survey3N_OCN

Survey3N_RGN

Survey3N_NGB

Survey3N_RE

Survey3N_NIR

 

Version 1.12 - March 16, 2021

OPTIONAL FIRMWARE - NOT STANDARD

  • Default boot mode = video capture
  • PWM 2000us start/stop video capture
  • All other features same as v1.11 firmware

Survey3W_RGB

Survey3W_OCN

Survey3W_RGN

Survey3W_NGB

Survey3W_RE

Survey3W_NIR

 

Survey3N_RGB

Survey3N_OCN

Survey3N_RGN

Survey3N_NGB

Survey3N_RE

Survey3N_NIR

 

Version 1.11 - February 25, 2021

  • New USB Mode supports 3 new user-configurable options:
    • Power (Default): When USB cable is connected to a computer or power source it charges the camera's internal battery.
    • SD Card Mount: When USB cable is connected to a computer the camera's uSD card is automatically mounted to the computer and the uSD contents can be edited/viewed. The camera buttons and rear LCD are not able to be used while in SD Mount mode. The camera's battery will also be charged.
    • USB Streaming: When USB is connected to computer the camera will be detected as a web camera and provide a live video stream. The camera buttons and rear LCD are not able to be used while in USB Streaming mode. The camera's battery will also be charged. 

Survey3W_RGB

Survey3W_OCN

Survey3W_RGN

Survey3W_NGB

Survey3W_RE

Survey3W_NIR

 

Survey3N_RGB

Survey3N_OCN

Survey3N_RGN

Survey3N_NGB

Survey3N_RE

Survey3N_NIR

 

Version 1.9 - October 10, 2019

  • Fixed output HDMI video to correctly be 1080p
  •  Changes to RGN camera custom white balance

 

Version 1.8 - July 30, 2019

  • Single firmware now for either GPS version, auto-detected
  •  Changes to RGN camera custom white balance

 

Version 1.7 - July 11, 2018

  • Changes to RGN camera custom white balance
  • Changes to RE camera custom white balance, shutter speed and ISO

 

Version 1.6 - May 23rd, 2018

  • Stop interval triggering at any time by pressing top shutter button
  • New RAW image format (12bit) fixes previous pixel errors in RAW+JPG mode
  • 6 new shutter speeds added: 1/90, 1/60, 1/15, 1/8, 1s, 3s
  • 5 new timer interval durations added: 1hr, 2hr, 6hr, 12hr, 24hr
  • Updated default white balance settings for some models
  • Updated default shutter speeds for some models 

 

Version 1.2 - January 4th, 2018

  • Improved PWM triggering detection
  • WIFI mode now remains turned on when camera power is turned off/on
  • WIFI mode possible in both Photo and Video capture modes

 

Version 1.1 - November 30th, 2017

  • Improved GPS altitude reading accuracy

 

 

Version 1.0 - November 9th, 2017

  • Original launch Firmware