MAPIR CLOUD - Online Photogrammetry Platform - EARLY ACCESS OPEN NOW

Onion Field (400ft) - March 26th, 2018

This survey was of an onion field during its vegetative growth stage, with a good dense canopy already. Harvest will be in June. There are a few noticeable rows where the planter had not functioned correctly.

The DJI Mavic Pro carried the camera during the flight using our Mavic Camera Mount, and covered the 140 acre survey in three batteries. A photo of our Calibration Ground Target captured just before each flight was used in our free MAPIR Camera Control (MCC) software to calibrate the image prior to stitching into an orthomosaic on Drone Deploy.

This flight follows our recommended survey overlap of at least 70% front-lap and 70% side-lap and a maximum 5mph (8kmh) speed for every 65ft (20m) of altitude (AGL) for RAW+JPG mode, and a maximum 10mph (16kmh) speed for every 65ft (20m) of altitude (AGL) for JPG only mode.

 

Vehicle DJI Mavic Pro
Mount DJI Mavic MAPIR Survey 3/2/1
Single Camera Mount
Height AGL 400ft (122m)
GSD (Average) 2.2in/px (5.6cm/px)
Speed 22mph (10m/s, 36kmh)
Surveyed Area 144 acres
Mapping Application Drone Deploy
Front Overlap (App Setting) 75%
Side Overlap (App Setting) 72%
Max Flight Speed (App Setting) 15m/s
Number of Batteries Used for Survey 3
Battery Used Per Flight 15%, 15%, 35%
Download Original Survey3W NGB Images CLICK HERE (1.98GB)
Download Original DJI Mavic Pro RGB Images CLICK HERE (3.8GB)

 

You can see the plant health maps by clicking the "Plant Health" button in the below windows (Chrome browser recommended). You can export the orthomosaics by clicking the Export button: